Alpin Racing Pro Warm is suitable for all damp to wet ski slopes at temperatures from +15°C to -2°C. ALPIN Racing PRO was developed in cooperation with Edi Unterberger (former service man of Marcel Hirscher) and the ÖSV especially for racing. With the ALPIN PRO SERIES from HWK, great successes have already been celebrated in the World Cup and from now on every junior and hobby racer can also start the races with this new series. Temperature range: +15°C to -2°C Ironing temperature: approx. 140°C Art. No.: 4240 Delivery form: Block Processing instructions for Alpin Racing Pro Warm: Wax at the specified ironing temperature! (Observe room temperature and avoid smoke development!) Cool for 15min, pull off (plexi blade), brush out and polish. https://vimeo.com/647680708
Alpine Racing Pro Warm
€87,00
inkl. MwSt. plus Shipping Costs
Gewicht | 0,13 kg |
---|---|
Größe | 9 × 3 × 10,5 cm |
Ähnliche Produkte
-
Rotor cork roller 100mm
€46,00Rotor cork roller 100mm enables waxing at a controlled temperature. Suitable for fluorine pencils and fluorine powder. First apply at…inkl. MwSt.
plus Shipping Costs
-
Small hand brush nylon hard
€21,00Polishing with the small Nylon Hart hand brush creates a glossy layer on the floor covering. Suitable for finishing all…inkl. MwSt.
plus Shipping Costs
-
Large slanted steel hand brush
€52,00The large angled steel hand brush is used to clean and open the structure before waxing. The bristles are set…inkl. MwSt.
plus Shipping Costs
-
Polar Extreme
€35,00Polar Extreme is suitable for all dry new and artificial snow types. Can also be used as a hardening powder…inkl. MwSt.
plus Shipping Costs
Product contains: 40 g
Alpin Racing Pro Warm
€87,00
inkl. MwSt. plus Shipping Costs
Alpin Racing Pro Warm ist geeignet für alle feuchten bis nassen Skipisten bei Temperaturen von +15°C bis -2°C.
ALPIN Racing PRO wurde in Zusammenarbeit mit Edi Unterberger (ehemaliger Servicemann von Marcel Hirscher) und dem ÖSV speziell für den Rennlauf entwickelt. Mit der ALPIN PRO SERIE von HWK wurden im Weltcup bereits große Erfolge gefeiert und ab sofort kann auch jeder Nachwuchs- und Hobby Rennläufer mit dieser neuen Serie in die Rennen starten.
Temperaturbereich: +15°C bis -2°C
Bügeltemperatur: ca. 140°C
Art. Nr.: 4240
Lieferform: Block
Verarbeitungshinweis für Alpin Racing Pro Warm:
Bei angegebener Bügeltemperatur wachsen! (Raumtemperatur beachten und Rauchentwicklung vermeiden!)
15min abkühlen, abziehen (Plexiklinge), ausbürsten und polieren.
Gewicht | 0,13 kg |
---|---|
Größe | 9 × 3 × 10,5 cm |
Ähnliche Produkte
-
Rotor Korkrolle 100mm
€46,00Rotor Korkrolle 100mm ermöglichen das Wachsen mit kontrollierter Temperatur. Für Fluorstifte und Fluorpulver geeignet. Erst mit niedriger Drehzahl auftragen, dann…inkl. MwSt.
plus Shipping Costs
-
Kleine Handbürste Bronze Fein
€26,00Die kleine Handbürste Bronze Fein wird zum Ausbürsten aller Wachse, Fluorprodukte und Strukturen verwendet. Alle Metallbürsten dürfen nur in Laufrichtung verwendet…inkl. MwSt.
plus Shipping Costs
-
Kleine Handbürste Nylon Hart
€21,00Durch das Polieren mit der kleinen Handbürste Nylon Hart entsteht eine Glanzschicht auf dem Belag. Zum Finishen für alle Produkte geeignet.…inkl. MwSt.
plus Shipping Costs
-
Stahlbürste ALPIN
€52,00Die Stahlbürste ALPIN wird zur mechanischen Reinigung und zum Vorbürsten bei harten Paraffinen verwendet. NEU: mit geradegestellten Stahlborsten! Alle Metallbürsten…inkl. MwSt.
plus Shipping Costs