Alpin Racing Pro Warm is suitable for all damp to wet ski slopes at temperatures from +15°C to -2°C. ALPIN Racing PRO was developed in cooperation with Edi Unterberger (former service man of Marcel Hirscher) and the ÖSV especially for racing. With the ALPIN PRO SERIES from HWK, great successes have already been celebrated in the World Cup and from now on every junior and hobby racer can also start the races with this new series. Temperature range: +15°C to -2°C Ironing temperature: approx. 140°C Art. No.: 4240 Delivery form: Block Processing instructions for Alpin Racing Pro Warm: Wax at the specified ironing temperature! (Observe room temperature and avoid smoke development!) Cool for 15min, pull off (plexi blade), brush out and polish. https://vimeo.com/647680708
Alpine Racing Pro Warm
€87,00
inkl. MwSt. plus Shipping Costs
Gewicht | 0,13 kg |
---|---|
Größe | 9 × 3 × 10,5 cm |
Ähnliche Produkte
-
Sp7 Polar
€18,00 – €100,00Sp7 Polar is a special wax for extremely cold and dry conditions. Super hard ski wax – also suitable for…inkl. MwSt.
plus Shipping Costs
Ausführung wählen Dieses Produkt weist mehrere Varianten auf. Die Optionen können auf der Produktseite gewählt werden -
Single axle 100mm with protective cover
€60,00Single axle with protective cap for rotor brushes 100mminkl. MwSt.
plus Shipping Costs
-
Rotor brush nylon blue 100mm
€42,00The nylon blue rotor brush for polishing all POWDER and kerosene waxes. Width 100mminkl. MwSt.
plus Shipping Costs
-
Small hand brush bronze hard
€26,00The small Bronze Hard hand brush is used before waxing to clean the coverings and open the pores and structure.…inkl. MwSt.
plus Shipping Costs
Alpin Racing Pro Warm
€87,00
inkl. MwSt. plus Shipping Costs
Alpin Racing Pro Warm ist geeignet für alle feuchten bis nassen Skipisten bei Temperaturen von +15°C bis -2°C.
ALPIN Racing PRO wurde in Zusammenarbeit mit Edi Unterberger (ehemaliger Servicemann von Marcel Hirscher) und dem ÖSV speziell für den Rennlauf entwickelt. Mit der ALPIN PRO SERIE von HWK wurden im Weltcup bereits große Erfolge gefeiert und ab sofort kann auch jeder Nachwuchs- und Hobby Rennläufer mit dieser neuen Serie in die Rennen starten.
Temperaturbereich: +15°C bis -2°C
Bügeltemperatur: ca. 140°C
Art. Nr.: 4240
Lieferform: Block
Verarbeitungshinweis für Alpin Racing Pro Warm:
Bei angegebener Bügeltemperatur wachsen! (Raumtemperatur beachten und Rauchentwicklung vermeiden!)
15min abkühlen, abziehen (Plexiklinge), ausbürsten und polieren.
Gewicht | 0,13 kg |
---|---|
Größe | 9 × 3 × 10,5 cm |
Ähnliche Produkte
-
Rotor Korkrolle 100mm
€46,00Rotor Korkrolle 100mm ermöglichen das Wachsen mit kontrollierter Temperatur. Für Fluorstifte und Fluorpulver geeignet. Erst mit niedriger Drehzahl auftragen, dann…inkl. MwSt.
plus Shipping Costs
-
Plexi Abziehklinge
€4,20 – €5,20Plexiklinge zum Abziehen der Wachse. 3mm – Art.-Nr. 8460 Euro 4,20 5mm – Art.-Nr. 8461 Euro 5,20inkl. MwSt.
plus Shipping Costs
Ausführung wählen Dieses Produkt weist mehrere Varianten auf. Die Optionen können auf der Produktseite gewählt werden -
Rotor Merinorolle 100mm
€42,00Der Merino Wool Roller zum Polieren von Flüssigwachsen und aufgeriebenen HIGHSPEED-Produkten. Breite 100mminkl. MwSt.
plus Shipping Costs
-
Große Handbürste Bronze Hart
€52,00Die große Handbürste Bronze Hart wird zum Freilegen von mittleren bis groben Strukturen verwendet. Alle Metallbürsten dürfen nur in Laufrichtung verwendet…inkl. MwSt.
plus Shipping Costs